遇到一个问题，如何通过dbus传送uint8数组元素
有3种方法，
1.直接传 ay
2.传 a(y)
3.xml定义为 ay，但是通过annotation 强行将 guchar 转为GVariant
可以参考：
如下图3中方法的xml示意
this means send the address of the array
方法一直接上 ay 如果遇到空字符会出错，简单的数组可以这么传，如果连你也不知道数组里面会有什么内容，千万不要用这个，有可能传到一半数据，就结束出错了。
方法二，挺好用，适合大量数据你也不知道里面是什么内容
方法三，对方法一的一种弥补，写了一段测试代码，client端解析有问题，但是没发现问题在哪，同样的一段代码放在server端就可以解析，放在client端就解析出错
上代码
server端:
/////// Header files/////// Own header#include "common.h" // Demo bus defines#include "server.h" // System header#include// GIO for dbus#include // GLIB for main loop#include #include #include #include #include #include // Generated headers#include "example.h"/////// Instance init/////static GMainLoop *pLoop = NULL;static ContiExampleInterface *pSkeleton = NULL;static int callNum = 0;/////// Normal functions/////static gboolean Emit_My_signal1(gconstpointer p){ gchar buf[20]; memset(buf, 0, 20); callNum++; sprintf(buf, "Server Signal1(%d)", callNum); conti_example_interface_emit_my_signal1(pSkeleton, buf); return TRUE;}static gboolean Emit_My_Signal2(gconstpointer p){ callNum++; GVariant *payload = g_variant_new("(is)", callNum, "Server Signal2"); conti_example_interface_emit_my_signal2(pSkeleton, payload); //g_print("Emit_My_Signal2() is called.\n"); return TRUE;}void test_Signal(){ unsigned char arrtest[10]={ 1,2,3,4,5,6,7,8,9}; conti_example_interface_emit_test_method (pSkeleton,arrtest,10); printf("test_Signal end\n");}static gboolean Emit_My_test_Signal(gconstpointer p){ test_Signal(); return TRUE;}void test_Signal_2(){ unsigned char arrtest[10]={ 11,12,13,14,15,16,17,18,19}; GVariantBuilder *builder; GVariant *value; builder = g_variant_builder_new (G_VARIANT_TYPE ("a(y)")); for (int i = 0; i < 10; i++) { g_variant_builder_add (builder, "(y)", arrtest[i]); } value = g_variant_new ("a(y)", builder); g_variant_builder_unref (builder); conti_example_interface_emit_test_method_2 (pSkeleton,value,10); printf("test_Signal_2 end\n");}static gboolean Emit_My_test_Signal_2(gconstpointer p){ test_Signal_2(); return TRUE;}void Test_Extract(GVariant *arg_addr){ unsigned char byteArray[1024]; int lengi=0; GVariantIter *iter; guchar data; printf("start : \n"); g_variant_get (arg_addr, "ay", &iter); printf("iter end : \n"); while (g_variant_iter_loop (iter, "y", &data)) { byteArray[lengi++] = data; } g_variant_iter_free (iter); printf("test_method_handler_3 data is: %d %d %d %d %d %d %d %d %d\n", byteArray,*(byteArray),*(byteArray+1),*(byteArray+2),*(byteArray+3),*(byteArray+4),*(byteArray+5),*(byteArray+6),*(byteArray+7),*(byteArray+8));}void test_Signal_3(){ unsigned char arrtest[10]={ 21,22,113,114,115,116,117,118,119}; GVariantBuilder *builder; GVariant *value; builder = g_variant_builder_new (G_VARIANT_TYPE ("ay")); for (int i = 0; i < 10; i++) { g_variant_builder_add (builder, "y", arrtest[i]); } value = g_variant_new ("ay", builder); g_variant_builder_unref (builder); Test_Extract(value); conti_example_interface_emit_test_method_3 (pSkeleton,value,10); printf("test_Signal_3 end\n");}static gboolean Emit_My_test_Signal_3(gconstpointer p){ test_Signal_3(); return TRUE;}static gboolean My_Method1(ContiExampleInterface *object, GDBusMethodInvocation *invocation, const gchar *in_arg, gpointer user_data){ g_print("Received method call. Parameter: %s.\n", in_arg); //conti_gdbus_example_set_my_property(pSkeleton, "Server Method..."); //conti_gdbus_example_complete_my_method(object, invocation, "Server Method"); conti_example_interface_complete_my_method1(object, invocation, in_arg); return TRUE;}static gboolean My_Method2(ContiExampleInterface *object, GDBusMethodInvocation *invocation, GVariant *in_arg, gpointer user_data){ gint in_arg1 = 0; gint in_arg2 = 0; gint out_arg2 = 0; gchar *out_arg1 = "My Method2"; GVariant *out_arg = NULL; // Get the input parameters g_variant_get(in_arg, "(ii)", &in_arg1, &in_arg2); // Generate the output parameters out_arg2 = in_arg1 + in_arg2; out_arg = g_variant_new("(si)", out_arg1, out_arg2); conti_example_interface_complete_my_method2(object, invocation, out_arg); return TRUE;}/////// Callback functions/////static void bus_acquired_cb(GDBusConnection *connection, const gchar *bus_name, gpointer user_data){ GError *pError = NULL; // Second step: Try to get a connection to the given bus. pSkeleton = conti_example_interface_skeleton_new(); // Third step: Attach to dbus signals (void) g_signal_connect(pSkeleton, "handle-my-method1", G_CALLBACK(My_Method1), NULL); (void) g_signal_connect(pSkeleton, "handle-my-method2", G_CALLBACK(My_Method2), NULL); // Fourth step: Export interface skeleton (void) g_dbus_interface_skeleton_export(G_DBUS_INTERFACE_SKELETON(pSkeleton), connection, CONTI_GDBUS_EXAMPLE_OBJECT_PATH, &pError); if(pError != NULL) { g_print("Error: Failed to export object. Reason: %s.\n", pError->message); g_error_free(pError); g_main_loop_quit(pLoop); }}static void name_acquired_cb(GDBusConnection *connection, const gchar *bus_name, gpointer user_data){ g_print("Acquired bus name: %s.\n", CONTI_GDBUS_EXAMPLE_BUS_NAME);}static void name_lost_cb(GDBusConnection *connection, const gchar *bus_name, gpointer user_data){ if(connection == NULL) { g_print("Error: Failed to connect to dbus.\n"); } else { g_print("Error: Failed to obtain bus name: %s.\n", CONTI_GDBUS_EXAMPLE_BUS_NAME); } g_main_loop_quit(pLoop);}/////// Thread functions/////int thread_create(){ int err; pthread_t thr; void *thr_fn(void *arg) { return((void *)0); } err = pthread_create(&thr, NULL, thr_fn, NULL); if (err != 0) { printf("Can't create thread: %s\n", strerror(err)); } else { printf("New thread created: %s\n", strerror(err)); } return err;}void create(){ // Start Dbus communication startDBusCommunication(); // Create new thread //thread_create();}void run(){ // Start the Main Event Loop which manages all available sources of events g_main_loop_run( pLoop );}void stop(){ // Stop Dbus communication stopDBusCommunication();}/////// Dbus communication functions/////int startDBusCommunication(){ int bRet = TRUE; // Init for usage of "g" types g_type_init(); g_print("startDBusCommunication: Server started.\n"); // Create main loop, but do not start it. pLoop = g_main_loop_new(NULL, FALSE); // First step: Connect to dbus (void) g_bus_own_name(CONTI_GDBUS_EXAMPLE_BUS, CONTI_GDBUS_EXAMPLE_BUS_NAME, G_BUS_NAME_OWNER_FLAGS_NONE, &bus_acquired_cb, &name_acquired_cb, &name_lost_cb, NULL, NULL); // Emit my signal1 every 1 second to trigger example communication //g_timeout_add(1000, &Emit_My_signal1, NULL); // Emit my signal2 every 2 second to trigger example communication //g_timeout_add(2000, &Emit_My_Signal2, NULL); g_timeout_add(2000, &Emit_My_test_Signal, NULL); g_timeout_add(2000, &Emit_My_test_Signal_2, NULL); g_timeout_add(2000, &Emit_My_test_Signal_3, NULL); return (bRet); }int stopDBusCommunication(){ int bRet = FALSE; if (pLoop != 0) { g_main_loop_quit(pLoop); g_main_loop_unref(pLoop); bRet = TRUE; } return (bRet);}
client端：
/////// Header files/////// Own header#include "common.h" // Demo bus defines#include "client.h"#include "client_version.h" // System header#include// GIO for dbus#include // GLIB for main loop#include #include #include #include #include #include #include #include // Generated headers#include "example.h"/////// Instance init/////static GMainLoop *g_pLoop = NULL;static GDBusConnection *g_pConnection = NULL;static ContiExampleInterface *g_pProxcy = NULL;static pthread_mutex_t g_mutex = PTHREAD_MUTEX_INITIALIZER;static pthread_mutex_t g_signal_cb_mutex = PTHREAD_MUTEX_INITIALIZER;static SIGNAL_CALLBACK_T g_signal_callback = {NULL};static pthread_mutex_t g_method_cb_mutex = PTHREAD_MUTEX_INITIALIZER;static METHOD_CALLBACK_T g_method_callback = {NULL};/////// static function prototype/////static void Method1Callback(GObject* source_object, GAsyncResult* res, gpointer user_data);static void Method2Callback(GObject* source_object, GAsyncResult* res, gpointer user_data);static gboolean My_Signal_1_Handler(ContiExampleInterface *object, const gchar *arg, gpointer user_data);static gboolean My_Signal_2_Handler(ContiExampleInterface *object, const GVariant *arg, gpointer user_data);static gboolean test_method_handler(ContiExampleInterface *object, const gchar *arg_addr,gint arg_length, gpointer user_data);static gboolean test_method_handler_2(ContiExampleInterface *object, GVariant *arg_addr,gint arg_length, gpointer user_data);static gboolean test_method_handler_3(ContiExampleInterface *object, const GVariant *arg_addr,gint arg_length, gpointer user_data);static void *run(void *arg);static int thread_create();static int init_global_var(void);static void print_version(void);static int startDBusCommunication();static int stopDBusCommunication();/////// Normal functions/////static void Method1Callback(GObject* source_object, GAsyncResult* res, gpointer user_data){ gchar *out_arg = NULL; GError *pError = NULL; METHOD1CALLBACK callback = NULL; conti_example_interface_call_my_method1_finish(g_pProxcy, &out_arg, res, &pError); pthread_mutex_lock(&g_signal_cb_mutex); callback = g_method_callback.callback1; pthread_mutex_unlock(&g_signal_cb_mutex); if (pError == NULL) { if(callback != NULL) { callback(out_arg, false, user_data); g_free(out_arg); } } else { if(callback != NULL) { callback(out_arg, true, user_data); g_print("Method1Callback: error message: %s.\n", pError->message); } g_error_free(pError); } }void My_method_1_Async(const char * in_arg, void *userdata){ conti_example_interface_call_my_method1(g_pProxcy, in_arg, NULL, Method1Callback, userdata); return;}static void Method2Callback(GObject* source_object, GAsyncResult* res, gpointer user_data){ GVariant *out_arg = NULL; GError *pError = NULL; gint out_arg2 = 0; gchar *out_arg1 = NULL; METHOD2CALLBACK callback = NULL; conti_example_interface_call_my_method2_finish(g_pProxcy, &out_arg, res, &pError); pthread_mutex_lock(&g_signal_cb_mutex); callback = g_method_callback.callback2; pthread_mutex_unlock(&g_signal_cb_mutex); if (pError == NULL) { // Get the result from the output parameter g_variant_get(out_arg, "(si)", &out_arg1, &out_arg2); if (callback != NULL) { callback(out_arg1, out_arg2, false, user_data); g_free(out_arg1); } } else { if (callback != NULL) { callback(out_arg1, out_arg2, true, user_data); } g_error_free(pError); }}void My_method_2_Async(const int in_arg1, const int in_arg2, void *userdata){ GVariant *in_arg = g_variant_new("(ii)", in_arg1, in_arg2); conti_example_interface_call_my_method2(g_pProxcy, in_arg, NULL, Method2Callback, userdata); return;}void registerSignalCallback(SIGNAL_CALLBACK_T *callback){ if (callback != NULL) { pthread_mutex_lock(&g_signal_cb_mutex); memcpy(&g_signal_callback, callback, sizeof(SIGNAL_CALLBACK_T)); pthread_mutex_unlock(&g_signal_cb_mutex); } else { g_print("registerSignalCallback: parameter point is NULL"); }}void registerMethodCallback(METHOD_CALLBACK_T *callback){ if (callback != NULL) { pthread_mutex_lock(&g_method_cb_mutex); memcpy(&g_method_callback, callback, sizeof(METHOD_CALLBACK_T)); pthread_mutex_unlock(&g_method_cb_mutex); } else { g_print("registerMethodCallback: parameter point is NULL"); }}static gboolean My_Signal_1_Handler(ContiExampleInterface *object, const gchar *arg, gpointer user_data){ SIGNAL1CALLBACK callback = NULL; // callback function pthread_mutex_lock(&g_signal_cb_mutex); callback = g_signal_callback.callback1; pthread_mutex_unlock(&g_signal_cb_mutex); if (callback != NULL) { callback(arg); } return TRUE;}static gboolean My_Signal_2_Handler(ContiExampleInterface *object, const GVariant *arg, gpointer user_data){ // Get the value from GVariant gint int_arg = 0; gchar *char_arg = NULL; SIGNAL2CALLBACK callback = NULL; g_variant_get(arg, "(is)", &int_arg, &char_arg); pthread_mutex_lock(&g_signal_cb_mutex); callback = g_signal_callback.callback2; pthread_mutex_unlock(&g_signal_cb_mutex); // callback function if (callback != NULL) { callback(int_arg, char_arg); } g_free(char_arg); return TRUE;}static gboolean test_method_handler(ContiExampleInterface *object, const gchar *arg_addr,gint arg_length, gpointer user_data){ unsigned char byteArray[1024]; GVariantIter *iter; guchar str; int lengi=0; printf("the addr is %d data is: %d %d %d %d %d %d %d %d %d\n", arg_addr,*(arg_addr),*(arg_addr+1),*(arg_addr+2),*(arg_addr+3),*(arg_addr+4),*(arg_addr+5),*(arg_addr+6),*(arg_addr+7),*(arg_addr+8)); return TRUE;}static gboolean test_method_handler_2(ContiExampleInterface *object, GVariant *arg_addr,gint arg_length, gpointer user_data){ unsigned char byteArray[1024]; int lengi=0; GVariantIter *iter; guchar data; GVariant* test=arg_addr; if(arg_addr!=NULL) { g_variant_get (arg_addr, "a(y)", &iter); while (g_variant_iter_loop (iter, "(y)", &data)) { byteArray[lengi++] = data; } g_variant_iter_free (iter); } printf("test_method_handler_2 data is: %d %d %d %d %d %d %d %d %d\n", byteArray,*(byteArray),*(byteArray+1),*(byteArray+2),*(byteArray+3),*(byteArray+4),*(byteArray+5),*(byteArray+6),*(byteArray+7),*(byteArray+8)); return TRUE;}static gboolean test_method_handler_3(ContiExampleInterface *object, const GVariant *arg_addr,gint arg_length, gpointer user_data){ unsigned char byteArray[20]; int lengi=0; GVariantIter *iter_3; unsigned char data; if(arg_addr!=NULL) { printf("start : \n"); g_variant_get ((GVariant*)arg_addr, "ay", &iter_3); printf("iter end : \n"); while (g_variant_iter_loop (iter_3, "y", &data)) { byteArray[lengi++] = data; } g_variant_iter_free (iter_3); printf("test_method_handler_2 data is: %d %d %d %d %d %d %d %d %d\n", byteArray,*(byteArray),*(byteArray+1),*(byteArray+2),*(byteArray+3),*(byteArray+4),*(byteArray+5),*(byteArray+6),*(byteArray+7),*(byteArray+8)); } else { printf("arg_addr NULL : \n"); } return TRUE;}/////// Thread functions/////static void *run(void *arg){ // Start the Main Event Loop which manages all available sources of events g_main_loop_run( g_pLoop ); return((void *)0);}static int thread_create(){ int err; pthread_t thr; err = pthread_create(&thr, NULL, run, NULL); if (err != 0) { printf("Can't create thread: %s\n", strerror(err)); } else { printf("New thread created: %s\n", strerror(err)); } return err;}static int init_global_var(void){ int ret = 0; //ret = initCallbackArray(&g_method1_callback); //ret = initCallbackArray(&g_method2_callback); memset(&g_signal_callback, 0, sizeof(SIGNAL_CALLBACK_T)); return ret;}static void print_version(void){ printf("example wrapper version: (major: %d, minor: %d)\n", dbusexampleclient_VERSION_MAJOR, dbusexampleclient_VERSION_MINOR);}INIT_RESULT_E initialize(){ INIT_RESULT_E ret; print_version(); pthread_mutex_lock(&g_mutex); if (g_pProxcy == NULL) { // Initialize some global variables //init_global_var(); // Start Dbus communication startDBusCommunication(); // Create new thread thread_create(); ret = INIT_SUCCESS; } else { g_print("initialize: Already initialized.\n"); ret = ALREADY_INITIALIZED; } pthread_mutex_unlock(&g_mutex); return ret;}void uninitialize(){ pthread_mutex_lock(&g_mutex); // Stop Dbus communication stopDBusCommunication(); g_pProxcy = NULL; g_pLoop = NULL; g_pConnection = NULL; pthread_mutex_unlock(&g_mutex);}/////// Dbus communication functions/////static int startDBusCommunication(){ int iLoop = 0; int bRet = TRUE; GError *pConnError = NULL; GError *pProxError = NULL; // Init for usage of "g" types g_type_init(); g_print("startDBusCommunication: Client started.\n"); do { bRet = TRUE; ++iLoop; g_print("StartDBusCommunication: try %d.\n", iLoop); // Create main loop, but do not start it. g_pLoop = g_main_loop_new(NULL, FALSE); // First step: Connect to dbus g_pConnection = g_bus_get_sync(CONTI_GDBUS_EXAMPLE_BUS, NULL, &pConnError); if(pConnError == NULL) { // Second step: Try to get a connection to the given bus. g_pProxcy = conti_example_interface_proxy_new_sync(g_pConnection, G_DBUS_PROXY_FLAGS_NONE, CONTI_GDBUS_EXAMPLE_BUS_NAME, CONTI_GDBUS_EXAMPLE_OBJECT_PATH, NULL, &pProxError); if (g_pProxcy == 0) { g_print("StartDBusCommunication: Failed to create proxy. Reason: %s.\n", pProxError->message); g_error_free(pProxError); bRet = FALSE; } } else { g_print("StartDBusCommunication: Failed to connect to dbus. Reason: %s.\n", pConnError->message); g_error_free(pConnError); bRet = FALSE; } if ( bRet == FALSE ) { //wait 250 millisecs usleep( 250*1000 ); } } while( bRet == FALSE ); if( bRet == TRUE) { // Third step: Attach to dbus signals (void)g_signal_connect(g_pProxcy, "my-signal1", G_CALLBACK(My_Signal_1_Handler), NULL); (void)g_signal_connect(g_pProxcy, "my-signal2", G_CALLBACK(My_Signal_2_Handler), NULL); (void)g_signal_connect(g_pProxcy, "test-method", G_CALLBACK(test_method_handler), NULL); (void)g_signal_connect(g_pProxcy, "test-method-2", G_CALLBACK(test_method_handler_2), NULL); (void)g_signal_connect(g_pProxcy, "test-method-3", G_CALLBACK(test_method_handler_3), NULL); } return (bRet); }static int stopDBusCommunication(){ int bRet = FALSE; if (g_pLoop != 0) { g_main_loop_quit(g_pLoop); g_main_loop_unref(g_pLoop); g_pLoop = NULL; bRet = TRUE; } return (bRet);}void Signal1_Callback(const char* arg){ printf("Main: ************************\n"); printf("Main: Signal1 callback \n"); printf("Main: ************************\n"); printf("ODC_Signal_1_Callback: Paramater value: %s.\n", arg);}void Signal2_Callback(const int int_arg, const char *str_arg){ printf("Main: ************************\n"); printf("Main: Signal2 callback \n"); printf("Main: ************************\n"); printf("ODC_Signal_2_Callback: Int value: %d, String value: %s\n", int_arg, str_arg);}void Method1_Callback(const char *arg, const bool isFail, const void *userdata){ int *p = (int*)userdata; printf("Main: ************************\n"); printf("Main: Method1 callback(%d) \n", *p); printf("Main: ************************\n"); if (isFail) { printf("Method1Callback: method1 call fail.\n"); } else { printf("Method1Callback: return value: %s.\n", arg); } return;}void Method2_Callback(const char *out_arg1, const int out_arg2, const bool isFail, const void *userdata){ int *p = (int*)userdata; printf("Main: ************************\n"); printf("Main: Method1 callback(%d) \n", *p); printf("Main: ************************\n"); if (isFail) { printf("Method2Callback: method2 call fails.\n"); } else { printf("Method2Callback: return value: (%s, %d).\n", out_arg1, out_arg2); }}int main(void){ SIGNAL_CALLBACK_T signal_callback; METHOD_CALLBACK_T method_callback; // Register signal callback function signal_callback.callback1 = Signal1_Callback; signal_callback.callback2 = Signal2_Callback; registerSignalCallback(&signal_callback); method_callback.callback1 = Method1_Callback; method_callback.callback2 = Method2_Callback; registerMethodCallback(&method_callback); initialize(); usleep(2000*1000); #if 0 // synchronize call the function "MyMethod1" defined in xcom.contiautomotive.Gdbus.Example.xml file g_printf("Main: ************************\n"); g_printf("Main: Synchronize call method1\n"); g_printf("Main: ************************\n"); gchar * sync_call_method1_arg = "method1 Synchronize call"; gchar * sync_call_method1_out = NULL; GError *sync_call_method1_error =NULL; My_method_1(sync_call_method1_arg, &sync_call_method1_out, &sync_call_method1_error); if (sync_call_method1_error == NULL) { g_printf("My_method_1: Method called. Return value: %s.\n", sync_call_method1_out); g_free(sync_call_method1_out); } else { g_printf("My_method_1: Failed to call method. Reason: %s.\n", sync_call_method1_error->message); g_error_free(sync_call_method1_error); } #endif // Asynchornize call the function "MyMethod1" defined in xcom.contiautomotive.Gdbus.Example.xml file /* printf("Main: ************************\n"); printf("Main: Asynchronize call method1\n"); printf("Main: ************************\n"); char * async_call_method1_arg = "1st method1 Asynchronize call"; int tmp1 = 1; My_method_1_Async(async_call_method1_arg, (void*)&tmp1); async_call_method1_arg = "2nd method1 Asynchronize call"; int tmp2 = 2; My_method_1_Async(async_call_method1_arg, (void*)&tmp2); async_call_method1_arg = "3rd method1 Asynchronize call"; int tmp3 = 3; My_method_1_Async(async_call_method1_arg, (void*)&tmp3); async_call_method1_arg = "4th method1 Asynchronize call"; int tmp4 = 4; My_method_1_Async(async_call_method1_arg, (void*)&tmp4); async_call_method1_arg = "5th method1 Asynchronize call"; int tmp5 = 5; My_method_1_Async(async_call_method1_arg, (void*)&tmp5); async_call_method1_arg = "6th method1 Asynchronize call"; int tmp6 = 6; My_method_1_Async(async_call_method1_arg, (void*)&tmp6); async_call_method1_arg = "7th method1 Asynchronize call"; int tmp7 = 7; My_method_1_Async(async_call_method1_arg, (void*)&tmp7); async_call_method1_arg = "8th method1 Asynchronize call"; int tmp8 = 8; My_method_1_Async(async_call_method1_arg, (void*)&tmp8); async_call_method1_arg = "9th method1 Asynchronize call"; int tmp9 = 9; My_method_1_Async(async_call_method1_arg, (void*)&tmp9); async_call_method1_arg = "10th method1 Asynchronize call"; int tmp10 = 10; My_method_1_Async(async_call_method1_arg, (void*)&tmp10); async_call_method1_arg = "11th method1 Asynchronize call"; int tmp11 = 11; My_method_1_Async(async_call_method1_arg, (void*)&tmp11); async_call_method1_arg = "12th method1 Asynchronize call"; int tmp12 = 12; My_method_1_Async(async_call_method1_arg, (void*)&tmp12); */ usleep(2000*1000); #if 0 // synchronize call the function "MyMethod2" defined in xcom.contiautomotive.Gdbus.Example.xml files g_printf("Main: ************************\n"); g_printf("Main: Synchronize call method2\n"); g_printf("Main: ************************\n"); GError *sync_call_method2_error =NULL; gint sync_call_method1_arg1 = 12; gint sync_call_method1_arg2 = 1234; gchar *sync_call_method1_out1 = NULL; gint sync_call_method1_out2 = 0; My_method_2(sync_call_method1_arg1, sync_call_method1_arg2, &sync_call_method1_out1, &sync_call_method1_out2, &sync_call_method2_error); if (sync_call_method2_error == NULL) { g_printf("My_method_2: Method called. Return value: (%s, %d).\n", sync_call_method1_out1, sync_call_method1_out2); g_free(sync_call_method1_out1); } else { g_printf("My_method_2: Failed to call method. Reason: %s.\n", sync_call_method1_error->message); g_error_free(sync_call_method1_error); } #endif // Asynchronize call the function "MyMethod2" defined in xcom.contiautomotive.Gdbus.Example.xml files printf("Main: ************************\n"); printf("Main: Asynchronize call method2\n"); printf("Main: ************************\n"); int async_call_method2_arg1 = 10; int async_call_method2_arg2 = 32; int tmp13 = 1; My_method_2_Async(async_call_method2_arg1, async_call_method2_arg2, (void*)&tmp13); usleep(2000*1000); uninitialize(); return 0;}
目前存在一个问题，就是用方法3强制转换后，client解析出错，但是同样的解析代码我放在server端去解析缺没问题...没找到问题点...知道的告诉我下...过几天再来看也许就能发现了...
我感觉用第二种方法比较好，稳妥，以后如果需要传输数据，我应该也会直接用第二种方法，把数据组合。
举个例子：比较复杂点如
<arg direction="out" name="sinks" type="a(ss(ii))">
// Type: a(ss(ii)) GVariant* sinks = NULL; GVariantBuilder *builder; builder = g_variant_builder_new (G_VARIANT_TYPE ("a(ss(ii))")); // Mic g_variant_builder_add (builder, "(ss(ii))", conn::hfc::SK_HFC_MIC.c_str(), "conn/hfcMic", am::A_AVAILABLE, am::AR_GENIVI_NEWMEDIA); sinks = g_variant_new ("a(ss(ii))", builder); g_variant_builder_unref (builder); iaudio_sink_complete_get_sinks ( object, invocation, sinks, am::E_OK);